SAFETY BOX GUIDE

SAFETY BOX

Step ONE:

Reach inside the safe and press the botton on the inside of the safe door to enter programming mode (you will hear a beep and the status light will turn orange).

Step TWO:

While in Programming mode, press 4 numbers on the safe keypad followed by the letter A or B to select a new code.

For example: 1234A (the status light will turn off upon completion)

Step THREE:

Lock the safe with the door open and enter the newly created code on the keypad. You should hear a click and the status light should turn green. If so, the code was create successfully and you can begin using the safe. If not, try again by restarting at Step One.

HELP?

Contact Lifestyle Properties if you are unable to program the safety box.